Dial pressure gauge
Standard type bourdon tube pressure gauge
The cost-effective design of JAKO's standard type bourdon tube pressure gauges and a measurement accuracy of 1.6% meet the normal metrological requirements and ambient conditions for sanitary, heating and ventilation systems as well as of the small apparatus engineering sector. Gases and measuring media of low viscosity that are not aggressive towards brass are reliably measured in a positive and negative pressure range of -1 bar to 600 bar.
[mehr lesen]Industrial type bourdon tube pressure gauges
JAKO high-quality and durable industrial type bourdon tube pressure gauges are used where an accurate pressure measurement, short calibration intervals and long life cycles in industrial environments are important. Acid and corrosion resistant designs as well as reading ranges in the positive and negative pressure range of -1 bar to 1000 bar, with and without liquid damping in application areas with mechanical vibrations and puslating pressure loads ensure highest reliability.
[mehr lesen]High precision pressure gauges
JAKO high precision pressures gauges are specially designed to meet public and commercial laboratories' and test departments' requirements and used for test equipment monitoring of industrial type pressure gauges (ISO 9001) and highly accurate comparison measurements (up to 0.1%). As accredited verification and calibration centre, JAKO is happy to be your partner when it comes to reliable measurement results.
[mehr lesen]Diaphragm pressure gauges
JAKO diaphragm pressure gauges with open flange are suitable for the measurement of viscous measuring media or measuring media containing solid matters and are also used with chemically aggressive liquids or gases with reading ranges in the negative or positive pressure range from 0/6 mbar to 0/40 bar with simutultaneous high overload protection. Targeted material selection and proven design features ensure a reliable operation in industrial indoor and outdoor applications as well as under hygiene-compatible application conditions (e.g. in the food industry).
[mehr lesen]Capsule pressure gauges
JAKO capsule pressure gauges are exclusively used for the measurement of gases, of small and low pressures in the measuring ranges of 0-6mbar to 0-600mbar, with simultaneous high overpressure load capacity, up to a multiple of the span (standard: 10 fold).
[mehr lesen]Safety pressure gauges
JAKO safety pressure gauges or solid front pressure gauges meet the high safety requirements of EN 837-1/S3 and ensure enhanced protection of people. If the measuring system is damaged (e.g. due to excessive pressure loads), the pressurised measuring medium is not discharged towards the front through the viewing glass (high risk of injury), but is channelled by a solid front between the measuring system and the display through a pressure relief opening at the back of the housing from the measuring device to outdoors.
[mehr lesen]Differential pressure gauges
JAKO duplex Bourdon tube pressure gauges indicate the pressure of two pressure lines (0-250 bar) as difference of two pointer positions or pointer scale positions. JAKO diaphragm differential pressure gauges, on the other hand, are designed so that the differential pressure (0 and 250mbar) of two lines (0 to 10 bar nominal pressure) is directly measured and indicated with high overload protection.
[mehr lesen]